Why do you need to know how heart conditions work?

A good doctor will know how to tell you when your heart is beating, but it’s the heart’s electrical activity that matters.

It’s this activity that is measured by a number called electrical activity, or ECG.

ECGs can be difficult to understand and read and they’re not always the same.

The ECG is a little like a GPS device.

You might think that if you can tell when the car is on the road, you should be able to tell when you’re at home, but there are some differences between how the ECG looks on a smartphone and a hospital monitor.

ECG data is a huge part of the heart disease care process, but understanding it can be tricky.

EC gags The most common EC gag is called a “cord tracings”.

These are usually a series of white dots, which can be anywhere from two to five minutes long, that indicate the rate of heart rate (HR) change.

There are many different types of cord tracers, but the most common are known as “pulse rate” or “systolic rate” EC gagging.

The two types of EC gagged are called a) pulse rate (pulse) and b) systolic.

You may be wondering how you can know if you’re having a heart attack or not, and what to do about it.

What’s a pulse rate?

A pulse rate is the amount of electrical activity a heart beats.

When the heart beats, the blood is pumped through the arteries, which are small vessels in the heart.

The blood is sent through the heart to the lungs and then to the rest of the body.

This electrical activity can be measured by measuring how much blood is being pumped by the heart into the heart as the blood pressure changes.

ECgag ECGG’s can look like two lines, each with three dots.

Each dot indicates a different rate of change in the rate at which a heart beat occurs.

For example, if you have a pulse of 2.5 beats per minute, you would see two lines at that rate.

If you have one line at a rate of 2, you see the same number of dots.

A different rate will be indicated by three dots at that level.

Pulses have different rates of change, so the two lines are different, but both of them are the same amount of change.

For instance, if the heart rate is 2.1 beats per min, you’d see two dots at the same rate, while a higher rate will indicate one more dot.

How to interpret ECG’s When a patient is having a cardiac arrest, their ECG shows one line that looks like two dots, and two dots that look like five dots.

This means that a cardiac event is happening, and that means they’re having an electrical event.

EC Gags don’t mean the patient is in cardiac arrest The ECGs don’t always mean the heart is in an arrest, but they do indicate an abnormal heart rhythm.

If your heart rate changes faster than normal, you’re likely to have a cardiac issue.

Symptoms and treatment The ECg can indicate the heart has been damaged.

For cardiac arrest or other heart problems, the ECg will show two lines that look similar to a “pulsed” or a “synthetic” heartbeat.

The first line shows the amount that’s being pumped into the body, and the second line shows what’s called “heart rate variability”.

ECG changes are normal.

If the EC is showing two lines and you see a “slight” or even “moderate” increase in heart rate, you have cardiac disease.

If it’s showing a “faint” or less than normal increase, you don’t have heart disease.

EC is a good way to tell if your heart has suffered damage or damage is occurring.

EC will also indicate whether or not the heart valve is blocked.

If there is no ECG showing a pulse at all, there’s no indication that the heart or any of its parts are damaged.

If one line indicates an increase in cardiac activity, there is usually a valve blockage that is causing an abnormal heartbeat.

If both lines show an increase, there might be a valve blocking problem.

Symptoms that indicate heart damage include rapid heartbeat, rapid heart rate and shortness of breath, as well as other symptoms that could include: Difficulty breathing